Kismet web UI error ?

Briefly describe your issue below:

What version of Parrot are you running? (include version (e.g. 4.6), edition(e.g. Home//KDE/OVA, etc.), and architecture (currently we only support amd64)

What method did you use to install Parrot? (Debian Standard / Debian GTK / parrot-experimental) Debian Standard

Configured to multiboot with other systems? (yes / no) no

List your networking hardware (make, model, firmware version): Ralink RT2561/RT61 802.11g PCI

If there are any similar issues or solutions, link to them below:

If there are any error messages or relevant logs, post them below:

Terminal output;

    kismet_server 
    INFO: Not running as root - will try to launch root control binary (/usr/bi
    n/kismet_capture) to control cards.
    INFO: Started kismet_capture control binary successfully, pid 8911
    INFO: Reading from config file /etc/kismet/kismet.conf
    debug - 8910 - child creating ipc fdfd
    INFO: No 'dronelisten' config line and no command line drone-listen 
      argument given, Kismet drone server will not be enabled.
    INFO: Created alert tracker...
    INFO: Creating device tracker...
    INFO: Registered 80211 PHY as id 0
    ERROR: Failed to open user plugin directory (/home/user/.kismet//plugins/):
        No such file or directory
    INFO: Loaded info for plugin 'aircrack-kismet.so': Plugin name: 
      'AIRCRACK-PTW' Plugin version: '2016-07-R1' Plugin description: 
      'Aircrack PTW Plugin'
    INFO: Activated plugin '/usr/lib/kismet/aircrack-kismet.so': 
      'AIRCRACK-PTW' '2016-07-R1' 
    INFO: Loaded info for plugin 'alertsyslog.so': Plugin name: 'ALERTSYSLOG' 
      Plugin version: '2016-07-R1' Plugin description: 'ALERTSYSLOG Plugin'
    INFO: Activated plugin '/usr/lib/kismet/alertsyslog.so': 'ALERTSYSLOG' 
      '2016-07-R1' 
INFO: Loaded info for plugin 'autowep-kismet.so': Plugin name: 'AUTOWEP' 
      Plugin version: '2016-07-R1' Plugin description: 'AutoWEP Plugin'
INFO: Activated plugin '/usr/lib/kismet/autowep-kismet.so': 'AUTOWEP' 
      '2016-07-R1' 
INFO: Loaded info for plugin 'btscan.so': Plugin name: 'BTSCAN' Plugin 
      version: '2016-07-R1' Plugin description: 'Active Bluetooth scanning 
      plugin'
INFO: Activated plugin '/usr/lib/kismet/btscan.so': 'BTSCAN' '2016-07-R1' 
INFO: Loaded info for plugin 'kismet-syslog.so': Plugin name: 'SYSLOG' 
      Plugin version: '2016-07-R1' Plugin description: 'SYSLOG Plugin'
ERROR: Kismet-Syslog not redirecting any messages to syslog because no 
       syslogtype= directive found in kismet.conf
INFO: Kismet-Syslog redirecting no messages to syslog
INFO: Activated plugin '/usr/lib/kismet/kismet-syslog.so': 'SYSLOG' 
      '2016-07-R1' 
INFO: Loaded info for plugin 'spectool_net.so': Plugin name: 'SPECTOOL' 
      Plugin version: '2016-07-R1' Plugin description: 'Spectool-Net'
INFO: Kismet will spend extra time on channels 1,6,11
INFO: Kismet will attempt to hop channels at 3 channels per second unless 
      overridden by source-specific options
INFO: No specific sources named on the command line, sources will be read 
      from kismet.conf
ERROR: No sources found - Remember, Kismet recently changed the format of 
       sources, and to make it easier to identify old configs, sources are 
       now identified by the 'ncsource=...' config file line.  Kismet CAN 
       be started with no predefined sources, however MAKE SURE this is 
       what you wanted!
INFO: Created TCP listener on port 2501
INFO: Kismet drone framework disabled, drone will not be activated.
INFO: Inserting basic packet dissectors...
INFO: Allowing Kismet frontends to view WEP keys
INFO: Starting GPS components...
INFO: Enabling reconnection to the GPS device if the link is lost
INFO: Using GPSD server on localhost:2947
ERROR: Could not open OUI file '/etc/manuf': No such file or directory
ERROR: Could not open OUI file '/usr/share/wireshark/wireshark/manuf': No 
       such file or directory
INFO: Opened OUI file '/usr/share/wireshark/manuf
INFO: Indexing manufacturer db
INFO: Completed indexing manufacturer db, 36549 lines 731 indexes
INFO: Creating network tracker...
ERROR: Reading config file '/home/user/.kismet//ssid_map.conf': 2 (No such file or directory)
ERROR: Reading config file '/home/user/.kismet//tag.conf': 2 (No such file or directory)
INFO: Creating channel tracker...
INFO: Registering dumpfiles...
INFO: Pcap log in PPI format
INFO: Opened pcapdump log file 'Kismet-20190709-03-35-00-1.pcapdump'
INFO: Opened netxml log file 'Kismet-20190709-03-35-00-1.netxml'
INFO: Opened nettxt log file 'Kismet-20190709-03-35-00-1.nettxt'
INFO: Opened gpsxml log file 'Kismet-20190709-03-35-00-1.gpsxml'
INFO: Opened alert log file 'Kismet-20190709-03-35-00-1.alert'
INFO: No spectools= line in config file, will not try to use spectools for 
      spectrum data
INFO: Activated plugin '/usr/lib/kismet/spectool_net.so': 'SPECTOOL' 
      '2016-07-R1' 
INFO: Kismet starting to gather packets
INFO: No packet sources defined.  You MUST ADD SOME using the Kismet 
      client, or by placing them in the Kismet config file 
      (/etc/kismet/kismet.conf)
INFO: kismet_capture pid 8911 synced with Kismet server, starting service 
      loop
INFO: Kismet server accepted connection from 127.0.0.1
INFO: Kismet server accepted connection from 127.0.0.1

This topic was automatically closed 120 days after the last reply. New replies are no longer allowed.