Briefly describe your issue below:
What version of Parrot are you running? 5.7.0-2parrot2-amd64
What method did you use to install Parrot? Debian Standard ISO
Configured to multiboot with other systems? yes
List your networking hardware (make, model, firmware version): BCM4331 802.11a/b/g/n (rev 02) | AWUS036NEH
If there are any similar issues or solutions, link to them below:
AWUS036NEH Firmware/Driver Error, DMESG below
If there are any error messages or relevant logs, post them below:
[ 184.120460] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 184.133831] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 184.134013] ieee80211 phy2: Selected rate control algorithm ‘minstrel_ht’
[ 184.156862] rt2800usb 2-1:1.0 wlx00c0ca95f345: renamed from wlan1
[ 184.184632] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file ‘rt2870.bin’
[ 184.184671] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 184.184676] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 184.444831] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71
[ 185.479408] ieee80211 phy2: rt2800_wait_csr_ready: Error - Unstable hardware
[ 185.479420] ieee80211 phy2: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)