I was doing a clean installation on the main drive, using a usb stick. I was able to install it. But everytime I try to boot from any option avaiable in the grub this error apears. The only option that allows me to boot is the one with acpi off but then nothing works correctly, I cannot conect to wifi or use all cpu’s.
-
ParrotOS iso in use: 6.0 Lorikeet Security Edition
-
Notebook Model: MacBook Air 13-inch Mid 2013 Intel Core I5
-
Application used for flashing the iso: BalenaEtcher
-
Logs/Terminal output:
Boot:
0.1588851 ACPI Error: Needed type [Reference, found Integer] ( _____ptrval____) (20230331/exresop-66)
0.1588851 ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20230331/dswexec-433)
0.1588851 ACPI Error: Aborting method _PR.CPU0. _PDC due to previous error (AE_AML OPERAND_TYPE) (20230331/psparse-529)
2.2334591 DMAR: DRHD: handling fault status reg 2
2.2334901 DMAR: [DMA Write NO_PASID] Request device [04:00.11] fault addr Ox
2.5255261 DMAR: DRHD: handling fault status reg 3
2.5255461 DMAR: [DMA Write NO_PASID] Request device [04:00.11] fault addr Ox
7.6608111 DMAR: DRHD: handling fault status reg 2
7.6608881 DMAR: [DMA Write NO_PASID] Request device [04:00.11] fault addr Oxfffe0000 fault reason 0x021 Present bit in context entry is clear
7.9405181 DMAR: DRHD: handling fault status reg 3
7.9406013 DMAR: [DMA Write NO_PASID] Request device [09:00.11] fault addr Oxfffe0000 fault reason 0x021 Present bit in context entry is clear
12.9924061 DMAR: DRHD: handling fault status reg 2
12.9924831 DMAR: [DMA Write NO_PASID] Request device [04:00.11] fault addr Oxfffe0000 fault reason 0x021 Present bit in context entry is clear
13.273769] DMAR: DRHD: handling fault status reg 3
13.2738521 DMAR: [DMA Write NO_PASID] Request device [09:00.11] fault addr Oxfffe0000 fault reason 0x021 Present bit in context entry is clear
18.3257321 DMAR: DRHD: handling fault status reg 2
18.3258081 DMAR: [DMA Write NO_PASID] Request device [04:00.11] fault addr Oxfffe0000 fault reason 0x021 Present bit in context entry is clear
BusyBox v1.35.0 (Debian 1:1.35.0-4+63) built-in shell (ash)
Enter "help" for a list of built-in commands.
(initramfs)
Exiting initramfs:
BusyBox v1.35.0 (Debian 1:1.35.0-4+63) built-in shell (ash)
Enter "help" for a list of built-in conmands
(initramfs) exit
Gave up waiting for root file system device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait lang enough?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! ULID-046e56c3-9a65-4931-a250-32534695f247 does not exist. Dropping to a shell!
BusyBox 01.35.0 (Debian 1:1.35.0-4+63) built-in shell (ash)
Enter "help" for a list of built-in commands.
(initramfs)
I would realy appreciate if someone can help me out with this situation. I like a lot the concept of Parrot OS and it would be amazing to be able to actualy use it on it’s max performance.