No sound with Parrot Security 4.10

Dear Parrot Forum people

Hi I just installed Parrot Security 4.10 but there is no sound. I’ve read similar post but none worked for me. Can come one advise me how I can configure sound please ?

Thank you for your time.

Sincerely

Tosh

can you do
lspci –v | grep –i audio
and paste the output here?

@Nia.X6.Root.
Thanks for your reply.

Here’s my output. It’s long.


┌─[root@tkr-30g6]─[/home/tkr]
└──╼ #lspci -v
00:00.0 Host bridge: Intel Corporation Coffee Lake HOST and DRAM Controller (rev 0c)
Subsystem: Hewlett-Packard Company Coffee Lake HOST and DRAM Controller
Flags: bus master, fast devsel, latency 0, IOMMU group 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (Whiskey Lake) (rev 02) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Hewlett-Packard Company UHD Graphics 620 (Whiskey Lake)
Flags: bus master, fast devsel, latency 0, IRQ 157, IOMMU group 1
Memory at e7000000 (64-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 3000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [100] Process Address Space ID (PASID)
Capabilities: [200] Address Translation Service (ATS)
Capabilities: [300] Page Request Interface (PRI)
Kernel driver in use: i915
Kernel modules: i915

00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0c)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 2
Memory at 4022100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 3
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device

00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP Thermal Controller (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP Thermal Controller
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 3
Memory at 4022113000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal

00:13.0 Serial controller: Intel Corporation Cannon Point-LP Integrated Sensor Hub (rev 11) (prog-if 00 [8250])
Subsystem: Hewlett-Packard Company Cannon Point-LP Integrated Sensor Hub
Flags: bus master, fast devsel, latency 0, IRQ 20, IOMMU group 4
Memory at 402210c000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel_ish_ipc
Kernel modules: intel_ish_ipc

00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI Controller (rev 11) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Cannon Point-LP USB 3.1 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 145, IOMMU group 5
Memory at e8220000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP Shared SRAM
Flags: bus master, fast devsel, latency 0, IOMMU group 5
Memory at e8230000 (64-bit, non-prefetchable) [size=8K]
Memory at 4022112000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3

00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #0 (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP Serial IO I2C Controller
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 6
Memory at 4022110000 (64-bit, non-prefetchable) [virtual] [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci

00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #1 (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP Serial IO I2C Controller
Flags: bus master, fast devsel, latency 0, IRQ 17, IOMMU group 6
Memory at 4022111000 (64-bit, non-prefetchable) [virtual] [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci

00:16.0 Communication controller: Intel Corporation Cannon Point-LP MEI Controller #1 (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 144, IOMMU group 7
Memory at 402210f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [a4] Vendor Specific Information: Len=14 <?>
Kernel driver in use: mei_me
Kernel modules: mei_me

00:16.3 Serial controller: Intel Corporation Cannon Point-LP Keyboard and Text (KT) Redirection (rev 11) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Cannon Point-LP Keyboard and Text (KT) Redirection
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19, IOMMU group 7
I/O ports at 3060 [size=8]
Memory at e8233000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [50] Power Management version 3
Kernel driver in use: serial

00:1c.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #5 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 122, IOMMU group 8
Bus: primary=00, secondary=01, subordinate=39, sec-latency=0
I/O behind bridge: 00004000-00005fff [size=8K]
Memory behind bridge: d0000000-e60fffff [size=353M]
Prefetchable memory behind bridge: 0000004000000000-0000004021ffffff [size=544M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Hewlett-Packard Company Cannon Point-LP PCI Express Root Port
Capabilities: [a0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Access Control Services
Capabilities: [150] Precision Time Measurement
Capabilities: [220] Secondary PCI Express
Capabilities: [250] Downstream Port Containment
Kernel driver in use: pcieport

00:1c.7 PCI bridge: Intel Corporation Cannon Point PCI Express Root Port #8 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 123, IOMMU group 9
Bus: primary=00, secondary=3a, subordinate=3a, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: e8100000-e81fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Hewlett-Packard Company Cannon Point PCI Express Root Port
Capabilities: [a0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Access Control Services
Capabilities: [150] Precision Time Measurement
Capabilities: [200] L1 PM Substates
Capabilities: [220] Secondary PCI Express
Capabilities: [250] Downstream Port Containment
Kernel driver in use: pcieport

00:1d.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #13 (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 124, IOMMU group 10
Bus: primary=00, secondary=3b, subordinate=3b, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: e8000000-e80fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Hewlett-Packard Company Cannon Point-LP PCI Express Root Port
Capabilities: [a0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Access Control Services
Capabilities: [150] Precision Time Measurement
Capabilities: [200] L1 PM Substates
Capabilities: [220] Secondary PCI Express
Capabilities: [250] Downstream Port Containment
Kernel driver in use: pcieport

00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC Controller (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP LPC Controller
Flags: bus master, fast devsel, latency 0, IOMMU group 11

00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP High Definition Audio Controller
Flags: bus master, fast devsel, latency 64, IRQ 16, IOMMU group 11
Memory at 4022108000 (64-bit, non-prefetchable) [size=16K]
Memory at 4022000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 3
Capabilities: [80] Vendor Specific Information: Len=14 <?>
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: sof-audio-pci
Kernel modules: snd_hda_intel, snd_soc_skl, snd_sof_pci

00:1f.4 SMBus: Intel Corporation Cannon Point-LP SMBus Controller (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP SMBus Controller
Flags: medium devsel, IRQ 16, IOMMU group 11
Memory at 402210e000 (64-bit, non-prefetchable) [size=256]
I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801

00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP SPI Controller (rev 11)
Subsystem: Hewlett-Packard Company Cannon Point-LP SPI Controller
Flags: bus master, fast devsel, latency 0, IOMMU group 11
Memory at fe010000 (32-bit, non-prefetchable) [size=4K]

00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (6) I219-LM (rev 11)
Subsystem: Hewlett-Packard Company Ethernet Connection (6) I219-LM
Flags: bus master, fast devsel, latency 0, IRQ 159, IOMMU group 11
Memory at e8200000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: e1000e
Kernel modules: e1000e

01:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06) (prog-if 00 [Normal decode])
Physical Slot: 4
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 12
Bus: primary=01, secondary=02, subordinate=39, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: d0000000-e60fffff [size=353M]
Prefetchable memory behind bridge: 0000004000000000-0000004021ffffff [size=544M]
Capabilities: [80] Power Management version 3
Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [ac] Subsystem: Hewlett-Packard Company JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018]
Capabilities: [c0] Express Upstream Port, MSI 00
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100] Device Serial Number 2d-8b-24-d1-e4-00-aa-00
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] Virtual Channel
Capabilities: [400] Power Budgeting <?>
Capabilities: [500] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700] Secondary PCI Express
Capabilities: [800] Latency Tolerance Reporting
Capabilities: [a00] L1 PM Substates
Capabilities: [b00] Precision Time Measurement
Kernel driver in use: pcieport

02:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 125, IOMMU group 13
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: e6000000-e60fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: [80] Power Management version 3
Capabilities: [88] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [ac] Subsystem: Hewlett-Packard Company JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018]
Capabilities: [c0] Express Downstream Port (Slot+), MSI 00
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100] Device Serial Number 2d-8b-24-d1-e4-00-aa-00
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] Virtual Channel
Capabilities: [400] Power Budgeting <?>
Capabilities: [500] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700] Secondary PCI Express
Capabilities: [900] Access Control Services
Kernel driver in use: pcieport

02:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 126, IOMMU group 14
Bus: primary=02, secondary=04, subordinate=38, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: d0000000-e5efffff [size=351M]
Prefetchable memory behind bridge: 0000004000000000-0000004021ffffff [size=544M]
Capabilities: [80] Power Management version 3
Capabilities: [88] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [ac] Subsystem: Hewlett-Packard Company JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018]
Capabilities: [c0] Express Downstream Port (Slot+), MSI 00
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100] Device Serial Number 2d-8b-24-d1-e4-00-aa-00
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] Virtual Channel
Capabilities: [400] Power Budgeting <?>
Capabilities: [500] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700] Secondary PCI Express
Capabilities: [900] Access Control Services
Kernel driver in use: pcieport

02:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 127, IOMMU group 15
Bus: primary=02, secondary=39, subordinate=39, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: e5f00000-e5ffffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Capabilities: [80] Power Management version 3
Capabilities: [88] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [ac] Subsystem: Hewlett-Packard Company JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018]
Capabilities: [c0] Express Downstream Port (Slot+), MSI 00
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100] Device Serial Number 2d-8b-24-d1-e4-00-aa-00
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] Virtual Channel
Capabilities: [400] Power Budgeting <?>
Capabilities: [500] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700] Secondary PCI Express
Capabilities: [900] Access Control Services
Kernel driver in use: pcieport

03:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 2C 2018] (rev 06)
Subsystem: Hewlett-Packard Company JHL7540 Thunderbolt 3 NHI [Titan Ridge 2C 2018]
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 16
Memory at e6000000 (32-bit, non-prefetchable) [size=256K]
Memory at e6040000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [a0] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] Device Serial Number 2d-8b-24-d1-e4-00-aa-00
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] Virtual Channel
Capabilities: [400] Power Budgeting <?>
Capabilities: [500] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600] Latency Tolerance Reporting
Kernel driver in use: thunderbolt
Kernel modules: thunderbolt

39:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018] (rev 06) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018]
Flags: bus master, fast devsel, latency 0, IRQ 147, IOMMU group 17
Memory at e5f00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [80] Power Management version 3
Capabilities: [88] MSI: Enable+ Count=1/8 Maskable- 64bit+
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Device Serial Number 2d-8b-24-d1-e4-00-aa-00
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] Virtual Channel
Capabilities: [400] Power Budgeting <?>
Capabilities: [500] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700] Secondary PCI Express
Capabilities: [800] Latency Tolerance Reporting
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

3a:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
Subsystem: Intel Corporation Wi-Fi 6 AX200
Flags: bus master, fast devsel, latency 0, IRQ 19, IOMMU group 18
Memory at e8100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [14c] Latency Tolerance Reporting
Capabilities: [154] L1 PM Substates
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi, wl

3b:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0, IOMMU group 19
Memory at e8000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [b0] MSI-X: Enable+ Count=33 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [158] Power Budgeting <?>
Capabilities: [168] Secondary PCI Express
Capabilities: [188] Latency Tolerance Reporting
Capabilities: [190] L1 PM Substates
Kernel driver in use: nvme
Kernel modules: nvme

┌─[root@tkr-30g6]─[/home/tkr]
└──╼ #grep -i audio


Nothing happened with grep -i audo but is it right reaction ?

Thanks for your time.

Tosh

please make sure your user is on the group ‘‘audio’’ to check that simply run a terminal and enter groups
if the user is there,
once do
pulseaudio --kill
and pulseaudio --start and check if it fixes

@Nia.X6.Root
Thanks but unfortunately there is still no sounds.
My terminal looks like below with the command you suggested.

┌─[tkr@tkr-30g6]─[~]
└──╼ $groups
tkr cdrom floppy sudo audio dip video plugdev netdev bluetooth lpadmin scanner docker
┌─[tkr@tkr-30g6]─[~]
└──╼ $pulseaudio --kill
┌─[tkr@tkr-30g6]─[~]
└──╼ $pulseaudio --start
┌─[tkr@tkr-30g6]─[~]
└──╼

Thanks for your time.
Sincerely

Tosh

Hi! I had the same sound issue, but I could fix it. Do you dualboot Parrot Sec OS along with Windows? If so, when switching from operating systems, always shutdown your pc before you start Parrot Sec.

By the way, if the above didn’t help, can you also post the contents of /etc/modprobe.d/blacklist-libnfc.conf. You may have blacklisted it which was the case with me.

Thanks!

@be1807v
Thanks for your advice !
Sorry how do i do /etc/modprobe.d/blacklist-libnfc.conf ?

I single boot Parrot btw. I erased whole SSD to install Parrot haha.

Thanks
Toshi

What also helps is like @Nia.X6.Root said. Put this command in your pulseaudio --start --log-target=syslog startup applications.
To do so, open the menu (Windows-Key / Super-Key), search for Startup Applications, open it and click on add. Give it a name. Next copy and paste the following command: pulseaudio --start --log-target=syslog in the command section. Give it a description if would like to. Save it and simply shutdown your computer and restart it.

If that does not help either post the contents of /var/log/syslog.

Regards

To view the contents of /etc/modprobe.d/blacklist-libnfc.conf.
Execute cat /etc/modprobe.d/blacklist-libnfc.conf or cat /etc/modprobe.d/blacklist.conf and paste the output in here

Hi @Tosh !
Did something help? Do you need some more information?

@be1807v
Thanks ! I still don’t have the sound after pulseaudio configuration.

My output is here
✗]─[tkr@tkr-30g6]─[~]
└──╼ $cat /etc/modprobe.d/blacklist-libnfc.conf
blacklist nfc
blacklist pn533
blacklist pn533_usb

Thanks

Tosh

A bit weird. Can you post the contents of /proc/asound/cards and /var/log/syslog? By the way are you sure pulseaudio is installed?

And almost forgot, you must add the --log-target=syslog flag when you start pulseaudio (pulseaudio --start) so everything gets logged (to view errors if there are any). Also run the command to start pulseaudio as a normal user (not the root user)

Regards

@be1807v
My output now is something like this. Second output is too long so I put a part of it here
pulseaudio is installed as well as attahed

[root@tkr-30g6]─[/home/tkr]
└──╼ #cat /proc/asound/cards
— no soundcards —
┌─[root@tkr-30g6]─[/home/tkr]
└──╼ #cat /var/log/syslog
Nov 22 00:00:00 tkr-30g6 rsyslogd: [origin software=“rsyslogd” swVersion=“8.2010.0” x-pid=“675” x-info=“https://www.rsyslog.com”] rsyslogd was HUPed
Nov 22 00:00:00 tkr-30g6 systemd[1]: logrotate.service: Succeeded.
Nov 22 00:00:00 tkr-30g6 systemd[1]: Finished Rotate log files.
Nov 22 00:00:01 tkr-30g6 systemd[1]: man-db.service: Succeeded.
Nov 22 00:00:01 tkr-30g6 systemd[1]: Finished Daily man-db regeneration.
Nov 22 00:00:05 tkr-30g6 systemd[1]: freeradius.service: Scheduled restart job, restart counter is at 959.
Nov 22 00:00:05 tkr-30g6 systemd[1]: Stopped FreeRADIUS multi-protocol policy server.
Nov 22 00:00:05 tkr-30g6 systemd[1]: Starting FreeRADIUS multi-protocol policy server…
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: FreeRADIUS Version 3.0.21
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: Copyright © 1999-2019 The FreeRADIUS server project and contributors
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: PARTICULAR PURPOSE
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: You may redistribute copies of FreeRADIUS under the terms of the
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: GNU General Public License
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: For more information about these matters, see the file named COPYRIGHT
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: Starting - reading configuration files …
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: Debug state unknown (cap_sys_ptrace capability not set)
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: Creating attribute Unix-Group
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: rlm_detail (auth_log): ‘User-Password’ suppressed, will not appear in detail output
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: Unable to check file “/etc/ssl/private/ssl-cert-snakeoil.key”: No such file or directory
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: /etc/freeradius/3.0/mods-enabled/eap[183]: Failed parsing configuration item “private_key_file”
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: rlm_eap_tls: Failed initializing SSL context
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: rlm_eap (EAP): Failed to initialise rlm_eap_tls
Nov 22 00:00:05 tkr-30g6 freeradius[6114]: /etc/freeradius/3.0/mods-enabled/eap[14]: Instantiation failed for module “eap”
Nov 22 00:00:05 tkr-30g6 systemd[1]: freeradius.service: Control process exited, code=exited, status=1/FAILURE
Nov 22 00:00:05 tkr-30g6 systemd[1]: freeradius.service: Failed with result ‘exit-code’.
Nov 22 00:00:05 tkr-30g6 systemd[1]: Failed to start FreeRADIUS multi-protocol policy server.
Nov 22 00:00:10 tkr-30g6 systemd[1]: freeradius.service: Scheduled restart job, restart counter is at 960.
Nov 22 00:00:10 tkr-30g6 systemd[1]: Stopped FreeRADIUS multi-protocol policy server.
Nov 22 00:00:10 tkr-30g6 systemd[1]: Starting FreeRADIUS multi-protocol policy server…
Nov 22 00:00:10 tkr-30g6 freeradius[6120]: FreeRADIUS Version 3.0.21
Nov 22 00:00:10 tkr-30g6 freeradius[6120]: Copyright © 1999-2019 The FreeRADIUS server project and contributors
Nov 22 00:00:10 tkr-30g6 freeradius[6120]: There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
Nov 22 00:00:10 tkr-30g6 freeradius[6120]: PARTICULAR PURPOSE
Nov 22 00:00:10 tkr-30g6 freeradius[6120]: You may redistribute copies of FreeRADIUS under the terms of the
Nov 22 00:00:10 tkr-30g6 freeradius[6120]: GNU General Public License

Hi @Tosh ! Unfortunatly the log file is to short, I can’t see why it failed to detect your sound cards. You can upload the file I guess (I’m new here so I am not sure). Else, use grep to filter out the results. Something like cat /var/log/syslog | grep pulseaudio

Regards

Thanks @be1807v.
Here’s the output
┌─[root@tkr-30g6]─[/home/tkr]
└──╼ #cat /var/log/syslog | grep pulseaudio
Nov 22 01:01:11 tkr-30g6 systemd[1085]: pulseaudio.service: Succeeded.
Nov 22 01:01:21 tkr-30g6 pulseaudio[87232]: Daemon already running.
Nov 22 03:22:05 tkr-30g6 dbus-daemon[656]: [system] Activating via systemd: service name=‘org.freedesktop.RealtimeKit1’ unit=‘rtkit-daemon.service’ requested by ‘:1.21’ (uid=139 pid=1005 comm="/usr/bin/pulseaudio --daemonize=no “)
Nov 22 03:23:55 tkr-30g6 systemd[985]: pulseaudio.service: Succeeded.
Nov 22 03:24:05 tkr-30g6 systemd[985]: pulseaudio.socket: Succeeded.
Nov 22 10:37:06 tkr-30g6 dbus-daemon[657]: [system] Activating via systemd: service name=‘org.freedesktop.RealtimeKit1’ unit=‘rtkit-daemon.service’ requested by ‘:1.21’ (uid=139 pid=997 comm=”/usr/bin/pulseaudio --daemonize=no “)
Nov 22 10:37:10 tkr-30g6 systemd[977]: pulseaudio.service: Succeeded.
Nov 22 10:37:20 tkr-30g6 systemd[977]: pulseaudio.socket: Succeeded.
Nov 22 12:30:06 tkr-30g6 dbus-daemon[650]: [system] Activating via systemd: service name=‘org.freedesktop.RealtimeKit1’ unit=‘rtkit-daemon.service’ requested by ‘:1.21’ (uid=139 pid=1025 comm=”/usr/bin/pulseaudio --daemonize=no “)
Nov 22 12:31:05 tkr-30g6 systemd[1004]: pulseaudio.service: Succeeded.
Nov 22 12:31:06 tkr-30g6 pulseaudio[1928]: [pulseaudio] pid.c: Daemon already running.
Nov 22 12:31:15 tkr-30g6 systemd[1004]: pulseaudio.socket: Succeeded.
Nov 22 13:18:47 tkr-30g6 dbus-daemon[655]: [system] Activating via systemd: service name=‘org.freedesktop.RealtimeKit1’ unit=‘rtkit-daemon.service’ requested by ‘:1.21’ (uid=139 pid=1007 comm=”/usr/bin/pulseaudio --daemonize=no ")
Nov 22 13:18:50 tkr-30g6 systemd[984]: pulseaudio.service: Succeeded.
Nov 22 13:18:51 tkr-30g6 pulseaudio[1357]: [pulseaudio] pid.c: Daemon already running.
Nov 22 13:19:01 tkr-30g6 systemd[984]: pulseaudio.socket: Succeeded.
Nov 22 14:04:08 tkr-30g6 pulseaudio[10871]: Daemon already running.
Nov 22 14:04:35 tkr-30g6 pulseaudio[11426]: [pulseaudio] pid.c: Daemon already running.
Nov 22 14:04:35 tkr-30g6 pulseaudio[11426]: [pulseaudio] main.c: pa_pid_file_create() failed.
Nov 22 14:05:22 tkr-30g6 pulseaudio[12400]: [pulseaudio] pid.c: Daemon already running.

regards

Tosh

can you once do
sudo apt install --reinstall alsa-base pulseaudio
and then
sudo alsa force-reload
and reboot the pc and check if sound is working or not

please once do
sudo apt install pavucontrol
then open it just by typing
pavucontrol in the terminal
after that there is button same as of volume, it might be muted sometimes so, check that once

Thanks @Nia.X6.Root here’s my screen shot.
I couldnt find the tab named volume but I put all volume max.
I still have no sound.

ok so can you do
sudo modprobe snd-hda-intel and chek if sounds work or not
if not workings lets reinstall the pulseaudio package with new configs

Thanks @Nia.X6.Root. I did your command and reinstalled pulseaudio but still no sounds.
My output is like this but did I get it right ?

┌─[tkr@tkr-30g6]─[~]
└──╼ $sudo modprobe snd-hda-intel
[sudo] password for tkr:
┌─[tkr@tkr-30g6]─[~]
└──╼ $sudo apt install --reinstall alsa-base pulseaudio
Reading package lists… Done
Building dependency tree
Reading state information… Done
Package alsa-base is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package ‘alsa-base’ has no installation candidate
┌─[✗]─[tkr@tkr-30g6]─[~]
└──╼ $sudo alsa force-reload
sudo: alsa: command not found
┌─[✗]─[tkr@tkr-30g6]─[~]
└──╼ $^C
┌─[✗]─[tkr@tkr-30g6]─[~]
└──╼ $sudo apt install pavucontrol
Reading package lists… Done
Building dependency tree
Reading state information… Done
pavucontrol is already the newest version (4.0-2).
The following packages were automatically installed and are no longer required:
cryptsetup-nuke-password dwarfdump golang-1.14 golang-1.14-doc
golang-1.14-go golang-1.14-src libarmadillo9 libasync-mergepoint-perl
libcdio18 libcfitsio8 libcollectdclient1 libdc1394-22 libdistorm3-3
libdwarf1 libfuture-perl libilmbase24 libio-async-loop-epoll-perl
libio-async-perl liblinux-epoll-perl libmdb2 libmdbsql2 libmetrics-any-perl
libobjc-9-dev libopenexr24 liborcus-0.15-0 liborcus-parser-0.15-0
libpgm-5.2-0 libplacebo29 libpoppler82 libpython2.7 libraw19 libsereal-perl
libsnmp35 libstd-rust-1.45 libstruct-dumb-perl libtest-metrics-any-perl
libtest-refcount-perl libtsk13 libusrsctp1 libyara3 python-attr python-cairo
python-certifi python-contextlib2 python-crypto python-gevent
python-gobject-2 python-greenlet python-html5lib python-idna
python-ipaddress python-libxml2 python-libxslt1 python-lxml python-numpy
python-olefile python-packaging python-pil python-pkg-resources python-py
python-pyparsing python-six python-urllib3 python-wcwidth
python-webencodings python-yara python3-chameleon python3-flask-restless
python3-grequests python3-mimeparse python3-mimerender python3-waitress
python3-webtest python3-zope.component python3-zope.event
python3-zope.hookable ruby-arel ruby-chunky-png ruby-rqrcode
volatility-tools
Use ‘sudo apt autoremove’ to remove them.
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
┌─[tkr@tkr-30g6]─[~]
└──╼ $pavucontrol
┌─[tkr@tkr-30g6]─[~]

Thanks so much for your patience.

Sincerely

Tosh